The hose that runs through your sprinkler is the primary means of water delivery to your house.
As a water pipe, the hose is typically designed to be used to supply the sprinkler systems.
It also carries water to the roof, where the pipes then carry the water to your home.
Water flows through the pipe, but the pressure from the hose doesn’t transfer into the pipe as it goes.
When the pressure is released, it can cause a leak.
In the case of a water main, the pipe is actually connected to a pump that carries water from the ground to the sprinklers, and then to the water main.
If a water source leaks, the water flowing through the hose can cause the hose to break.
This can lead to a fire, and a sprinklers can’t operate until it’s repaired.
To fix a leaking water main: Connect the water pipe to a water pump and pump the water into the hose.
Remove the water line from the pump and replace it with a new one.
Put the new hose through the old one.
Run a hose clamp through the new line to hold it in place.
Remove any bolts or nuts on the old line.
Put a new hose up the hose and back into the pump.
Run the old hose through a new water line.
Re-install the old water line with the new pipe.
Repeat the process.
To ensure the new water supply is flowing, the pump should run at a steady flow.